hi there.
im trying to implement a PNP image upgrade feature using Cisco prime infrastructure 2.2 to upgrade the IOS on access switches. Im getting mixed results, once in a while the IOS image will successfully upgrade. most of the time the process fails. ive included some logs of the errors from both PI and the device (catalyst 2960-x) if anyone could offer some advice would be greatly appreciated
ntacted | 12:37:46 PM | |
Profile triggered | 12:37:46 PM | |
Image inventory initiated | 12:37:46 PM | |
Image inventory obtained | 12:37:56 PM | |
Image upgrade initiated | 12:38:21 PM | |
Image distribution failed | 12:38:21 PM | Device is not connected. |
Image activation failed | 12:38:21 PM | Device is not connected. |
CLI config initiated | 12:38:22 PM | |
CLI config failed | 12:38:22 PM | Config-1002:Device-Not-Responding |
Device contacted | 12:38:33 PM | |
Profile triggered | 12:38:33 PM | |
Image inventory initiated | 12:38:33 PM | |
Image inventory obtained | 12:38:40 PM | |
Device contacted | 12:38:59 PM | |
Profile triggered | 12:38:59 PM | |
Image inventory initiated | 12:38:59 PM | |
Image upgrade initiated | 12:39:01 PM | |
Image inventory obtained | 12:39:07 PM | |
Image upgrade initiated | 12:39:07 PM | |
Image distribution failed | 12:40:07 PM | Image Evaluation timed out for [device id=FCW1****]. |
Image activation failed | 12:40:07 PM | Image Evaluation timed out for [device id=FCW1****]. |
CLI config initiated | 12:40:08 PM | |
CLI config success with warning | 12:40:08 PM | Config-1004:CNS-Config-Warning |
Device is already in inventory | 12:40:08 PM | IP Address : 10.*.*.* |
Provisioning complete | 12:40:08 PM | |
Image distribution failed | 12:40:33 PM | Error Code :- 502,Error Messgae :- OPERATION FAIL. Additional Info :-OPERATION_FAILURE (Errcode=CNS_OPERATION_FAILED Info=Image is not a valid IOS image in tar format or not existing) |
Image activation failed | 12:40:33 PM | Error Code :- 502,Error Messgae :- OPERATION FAIL. Additional Info :-OPERATION_FAILURE (Errcode=CNS_OPERATION_FAILED Info=Image is not a valid IOS image in tar format or not existing) |
CLI config initiated | 12:40:34 PM | |
CLI config success with warning | 12:40:34 PM | Config-1004:CNS-Config-Warning |
Device is already in inventory | 12:40:34 PM | IP Address : 10.*.*.* |
Provisioning complete | 12:40:34 PM |
