cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1137
Views
0
Helpful
3
Replies

Prime Infra 3.1 reporting

mxelkin
Level 1
Level 1

I want to report on the ALL the devices in the system.  I specifically need 1. Device Name, 2. IP Address, 3. Product ID, 4. Location.  That's about it.   None of the reports seem to include Product ID which is the MOST IMPORTANT field.  Instead they provide Product Type.  which is too generic.  

1 Accepted Solution

Accepted Solutions

I upgraded my 3.1 to 3.3, sorry about that..

 

for what it is worth.. the report you want can easily be done using 3.3 both Custom and Composite Reports.

 

 

 

 

View solution in original post

3 Replies 3

when you say product ID, give me an example. like below.

 

NAME: "CISCO2921/K9 chassis", DESCR: "CISCO2921/K9 chassis" PID: CISCO2921/K9 , VID: V05 

On the path /Network Devices/ Device Groups / All Devices / "Device Name"

Then System Summary page. 

 

There are 2 columns:

The left column has IP address, Device Name, Device Type, Up Time etc.

The right column has Name, Description, Product ID, Version, Serial Number, ect.

 

What I want in the report is the field labeled "Product ID" or "Description" in the right column.  NOT the "Device Type" in the left column

I upgraded my 3.1 to 3.3, sorry about that..

 

for what it is worth.. the report you want can easily be done using 3.3 both Custom and Composite Reports.

 

 

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: