Prime Infrastructure 2.0 is not accepting ubf patch file for upload

muddedj · ‎01-17-2014

Hi,

After successfully installing Prime Infrastructure 2.0 on a single server via OVA file in ESX, i tried to install all the latest patches.

- pi_update_2.0-3.zip was installed successful

But for the patch "pi_dev_pack_update_2.0-10.ubf" i was not be able to do the file-upload via the Web-GUI.

Is there anyone who knows how to put this file on the Prime server and how to install this patch via CLI ?

-------------

Cisco Application Deployment Engine OS Release: 2.0

ADE-OS Build Version: 2.0.6.003-px-build

ADE-OS System Architecture: x86_64

Hostname: xxxxxxx

Version information of installed applications

---------------------------------------------

Cisco Prime Infrastructure

------------------------------------------

Version : 2.0.0.0.294

-------------

Kind regards,

Danjan Mudde.

AFROJ AHMAD · ‎01-17-2014

Hi Danjan,

****These patches cannot be applied via cli and can only be applied from GUI of Prime*****

Go to the link below and download the "pi_dev_pack_update_2.0-10.ubf"

http://software.cisco.com/download/release.html?mdfid=284422771&flowid=45323&softwareid=28
4272933&release=2.0.10&relind=AVAILABLE&rellifecycle=&reltype=all

After downloading the file, go to "Administration > Software Update", click upload
update file, browse to the file location that you've downloaded.  
Once the file has beenuploaded, you can select the update and click install.  
After installing, it shouldindicate "Pending Restart" = Yes.  You will likely need to 
go to the cli and do an "ncs stop" and then "ncs start".

Hope it will help

Thanks-
Afroz
[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

muddedj · ‎01-21-2014

Hi Afroz,

Thanks for your reply!. I have checked the link and saw that this is the way i have tried to install the

"pi_dev_pack_update_2.0-10.ubf" file.

After uploading the file, the file won't appear in the list to do the update.

It seems that the Prime application won't accept the file.

I have tried to do a new download but it fails again. I tried to do the upload with different browsers and it fails to.

A restart from the prime server is not the solution.

Hopefully there is someone with a solution for this problem?

Regards,

Danjan.

anthonykahwati · ‎08-21-2014

Hi

I am having the same issue that you have described above. Did you get anywhere with this?

Thanks

Anthony