03-15-2018 09:14 AM - edited 03-01-2019 06:28 PM
Hello guys,
After initial setup of prime 3.1 on a physical appliance Gen2, I tried to update to 3.1.7 (PI_3_1_7-1.0.16.ubf) through web using local drive from my laptop and I am getting the following message:
An error occurred while uploading file:
Processing of multipart/form-data request failed. No space left on device
It is an standalone installation for now, the appliance has no internet connectivity, my reference was:
Here is the disk usage:
ade # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/smosvg-rootvol
3.9G 294M 3.4G 8% /
tmpfs 32G 1.4G 31G 5% /dev/shm
/dev/mapper/smosvg-altrootvol
124M 5.6M 113M 5% /altroot
/dev/sda1 485M 41M 420M 9% /boot
/dev/mapper/smosvg-home
124M 5.6M 113M 5% /home
/dev/mapper/smosvg-localdiskvol
248G 188M 235G 1% /localdisk
/dev/mapper/smosvg-optvol
1.4T 25G 1.3T 2% /opt
/dev/mapper/smosvg-recvol
124M 5.6M 113M 5% /recovery
/dev/sda2 97M 5.6M 87M 7% /storedconfig
/dev/mapper/smosvg-storeddatavol
9.7G 151M 9.0G 2% /storeddata
/dev/mapper/smosvg-tmpvol
2.0G 971M 913M 52% /tmp
/dev/mapper/smosvg-usrvol
6.8G 967M 5.5G 15% /usr
/dev/mapper/smosvg-varvol
3.9G 212M 3.5G 6% /var
I appreciate any help
03-15-2018 11:11 AM
- Try stopping prime (ncs stop) ; followed by ncs cleanup ; answer positive to all action-based questions. Reboot afterwards, The reboot is advised instead of ncs start.
M.
03-15-2018 11:36 AM
Hello M.
Thanks for the information, I will try and post the results here, probably next week.
Regards
03-15-2018 12:00 PM
03-15-2018 11:36 PM
No, not for a ubf based installation.
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide