03-06-2018 02:01 PM - edited 03-01-2019 06:26 PM
Hello everybody,
I prepared a template for configuring a username and password in several routers, I have made some tests and the template is deploying correctly.
However, when I tried to deploy a template for deleting the usernames I created with the previous template, I found that the job was running for some minutes and after that, it is displayed with a status of Failure.
The error the PI gives me is:
Error : Connnection timed out while executing the command Current output : no username username
This operation will remove all username related configurations with same name.Do you want to continue? [confirm]
Current expects : (Router-Name.{0,30}|Router-Name)([^)]+)#s*z
Router-Name#s*z
[y/n]
ACCEPT? (yes/[no]):
It seems that the problem is that when the router receives the command no username, it wants to receive a confirmation that the PI is not sending.
If I enter the command in the CLI of the router, a simple return provides the confirmation.
Does someone know how to send that "return" or confirmation with the PI in the template?
Thanks!
Solved! Go to Solution.
05-04-2022 07:34 AM
I solved the issue by using multi line commands in the fix CLI section of the policy. see example below
<MLTCMD>
no username testuser1
y
no username testuser2
y
username testuser3 privilege 15 secret 9 $34tdsvg43tgfve.jvHhyb3PUlX42.PBbRObkTY1aIqH06P5J0yegA2
</MLTCMD>
05-04-2022 06:47 AM
Did you find a solution to your problem? I'm having the same issue with Prime 3.9
05-04-2022 07:34 AM
I solved the issue by using multi line commands in the fix CLI section of the policy. see example below
<MLTCMD>
no username testuser1
y
no username testuser2
y
username testuser3 privilege 15 secret 9 $34tdsvg43tgfve.jvHhyb3PUlX42.PBbRObkTY1aIqH06P5J0yegA2
</MLTCMD>
08-17-2023 05:15 PM
Thank you Ilyas,
I didn't get the notification of your reply in the post and didn't post the solution that I found (months later).
Indeed, as you mentioned, the solution is to use the multiline commands.
Best!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: