09-30-2013 02:52 AM
Hi Experts,
I am getting error when trying to give ip address to 3550 switch interfcae
check below error
SW-3500(config)#
SW-3500(config)#int fa0/7
SW-3500(config-if)#no swi
SW-3500(config-if)#no switchport mo
SW-3500(config-if)#no switchport mode
SW-3500(config-if)#no switchport acce
SW-3500(config-if)#no switchport access vla
SW-3500(config-if)#no switchport access vlan
SW-3500(config-if)#ip address 1.1.1.1 255.0.0.0
^
% Invalid input detected at '^' marker.
SW-3500(config-if)#^Z
SW-3500#
00:15:38: %SYS-5-CONFIG_I: Configured from console by consolesh ver
SW-3500#sh version
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5.2)XU, MAINTENANCE IN
TERIM SOFTWARE
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 17-Jul-00 18:29 by ayounes
Image text-base: 0x00003000, data-base: 0x00301F3C
ROM: Bootstrap program is C3500XL boot loader
SW-3500 uptime is 15 minutes
System returned to ROM by power-on
System image file is "flash:c3500XL-c3h2s-mz-120.5.2-XU.bin"
cisco WS-C3524-XL (PowerPC403) processor (revision 0x01) with 8192K/1024K bytes
of memory.
Processor board ID FAA0502M1GG, with hardware revision 0x00
Last reset from power-on
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:04:C1:C1:F1:C0
Motherboard assembly number: 73-3904-11
Power supply part number: 34-0851-02
Motherboard serial number: FAB0501B21D
Power supply serial number: PHI044502HF
Model revision number: A0
Model number: WS-C3524-XL-EN
System serial number: FAA0502M1GG
Configuration register is 0xF
SW-3500#
Solved! Go to Solution.
09-30-2013 04:34 AM
Hi,
3524 switch does not support L-3 functionality.
Regards,
Shajakhan.K
09-30-2013 09:15 AM
In your original post is output from show version and it is quite clear that this switch is a 3524
cisco WS-C3524-XL (PowerPC403) processor (revision 0x01) with 8192K/1024K bytes
of memory.
HTH
Rick
09-30-2013 03:22 AM
Enter "no switchport" under an interface.
Sent from Cisco Technical Support iPhone App
09-30-2013 03:56 AM
Hi,
Thanks for your soon reply i appied no switchport
but it is incomplete coomand.Please check below config
SW-3500(config-if)#no switchport
% Incomplete command.
SW-3500(config-if)#no switchport ?
access Set access mode characteristics of the interface
mode Set trunking mode of the interface
multi Set characteristics when in multi-VLAN mode
priority Set 802.1p priorities
trunk Set trunking characteristics of the interface
voice Voice appliance attributes
09-30-2013 04:34 AM
Hi,
3524 switch does not support L-3 functionality.
Regards,
Shajakhan.K
09-30-2013 05:34 AM
Hi,
I am dealing with 3550 switch and its L3 switch
09-30-2013 09:15 AM
In your original post is output from show version and it is quite clear that this switch is a 3524
cisco WS-C3524-XL (PowerPC403) processor (revision 0x01) with 8192K/1024K bytes
of memory.
HTH
Rick
09-30-2013 10:04 AM
Sorry i dint check properly so what is the solutin for it ?can i change ios to assign ip address.
09-30-2013 10:23 AM
This question was also posted in another forum and in that forum we have provided the answer that it is a limitation of the switch. So changing IOS would not provide a solution. The solution is to use a different switch which does have support for layer 3 processing.
HTH
Rick
09-30-2013 11:17 AM
Thanks guys for reply and all is extremely helpful.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: