QOS - ASA 5505

[Nikolas Valerio]

Good morning.

I'm having trouble configuring a QoS for my network. As i have never configured QoS on ASA equipment, i dont know if my configuration os correct.

The fact is i have a video conference equipment on my internal network, with the ip address of 192.168.1.100.

All my connectios comming from 201.x.x.3 are sent for my camera inside my network. Almost like a DMZ configuration.

This is the QoS configuration, but i dont know if its correct.

Can someone read and tell me ?

acess-list ip-qos extended permit ip 192.168.1.100 255.255.255.255 any
acess-list ip-qos extended permit ip any 192.168.1.100 255.255.255.255

class-map qos
description qos policy
match access-list ip-qos

policy-map qos
class qos
  police output 1045800 1048576
  police input 256000 256000

service-policy qos interface inside

Thanks !

[joejoesmoe123]

I don't have a clear picture of what you are doing or which direction the data's going, but you probably need to apply it for outbound traffic to the outside interface for best affect.  I don't know much about it but I followed the info in this article and helped me.

http://brian-kayser.blogspot.com/2010/10/doing-asa-quality-of-service-qos.html

Cheers.