cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5295
Views
0
Helpful
1
Replies

"snmp-server enable traps envmon" missing on IOS XE 16.6

Eumartinez
Level 1
Level 1

I am unable to enable the "envmon" traps on IOS XE on a new C1111-4P device.

How can we send CPU, FAN, Temp alarms?

---------------------------------------------------------------------------------------

RESXXXXXX(config)#snmp-server enable traps e? 
eigrp          entity        entity-diag  entity-perf
entity-qfp     entity-state  ether-oam    ethernet
event-manager 

RESXXXXXX(config)#snmp-server enable traps ?       
  aaa_server       Enable SNMP AAA Server traps
  adslline         Enable ADSL Line-MIB traps
  alarms           Enable SNMP alarms traps
  atm              Enable SNMP atm traps
  auth-framework   Enable SNMP CISCO-AUTH-FRAMEWORK-MIB traps
  bfd              Allow SNMP BFD traps
  bgp              Enable BGP traps
  bulkstat         Enable Data-Collection-MIB Collection notifications
  c3g              Enable Cellular 3G modem reset traps
  call-home        Enable SNMP CISCO-CALLHOME-MIB traps
  casa             Enable SNMP casa traps
  cef              Enable SNMP CEF traps
  cnpd             Enable NBAR Protocol Discovery traps
  config           Enable SNMP config traps
  config-copy      Enable SNMP config-copy traps
  config-ctid      Enable SNMP config-ctid traps
  copy-config      Enable SNMP config-copy traps
  cpu              Allow cpu related traps
  dhcp             Enable SNMP dhcp traps
  dlsw             Enable SNMP dlsw traps
  ds1              Enable SNMP DS1 traps
  ds3              Enable SNMP DS3 traps
  dsp              Enable SNMP dsp traps
  eigrp            Enable SNMP EIGRP traps
  entity           Enable SNMP entity traps
  entity-diag      Enable SNMP CISCO-ENTITY-DIAG-MIB traps
  entity-perf      Enable SNMP CISCO-ENTITY-PERFORMANCE-MIB traps
  entity-qfp       Enable SNMP CISCO-ENTITY-QFP-MIB traps
  entity-state     Enable SNMP ENTITY-STATE-MIB traps
  ether-oam        Enable SNMP ethernet oam traps
  ethernet         Enable SNMP Ethernet traps
  event-manager    Enable SNMP Embedded Event Manager traps
  firewall         Enable SNMP Firewall traps
  flash            Enable SNMP FLASH notifications
  flowmon          Enabel SNMP flowmon notifications
  frame-relay      Enable SNMP frame-relay traps
  fru-ctrl         Enable SNMP entity FRU control traps
  gdoi             Enable SNMP GDOI traps
  hsrp             Enable SNMP HSRP traps
  ike              Enable IKE traps
  ip               Enable SNMP IP traps
  ipmulticast      Enable SNMP ipmulticast traps
  ipsec            Enable IPsec traps
  ipsla            Enable SNMP IP SLA traps
  isdn             Enable SNMP isdn traps
  isg-mib          Enable isgmib Job finished trap
  isis             Enable IS-IS traps
  l2tun            Enable SNMP L2 tunnel protocol traps
  license          Enable license traps
  lisp             Enable SNMP LISP MIB traps
  lte              Enable Cellular Extension modem reset traps
  memory           Enable SNMP Memory traps
  mpls             Enable SNMP MPLS traps
  msdp             Enable SNMP MSDP traps
  mvpn             Enable Multicast Virtual Private Networks traps
  netsync          Enable SNMP netsync traps
  nhrp             Enable SNMP NHRP traps
  ospf             Enable OSPF traps
  ospfv3           Enable OSPFv3 traps
  otn              Enable SNMP OTN traps
  pfr              Enable SNMP PfR traps
  pim              Enable SNMP PIM traps
  pimstdmib        Enable SNMP PIM-STD-MIB traps
  pki              Enable SNMP PKI Traps
  power-ethernet   Enable SNMP power ethernet traps
  pppoe            Enable SNMP pppoe traps
  pw               Enable SNMP PW traps
  resource-policy  Enable CISCO-ERM-MIB notifications
  rf               Enable all SNMP traps defined in CISCO-RF-MIB
  rsvp             Enable RSVP flow change traps
  smart-license    Enable smart license traps
  snmp             Enable SNMP traps
  sonet            Enable SNMP SONET traps
  srp              Enable SRP protocol traps
  stpx             Enable SNMP STPX MIB traps
  syslog           Enable SNMP syslog traps
  transceiver      Enable SNMP transceiver traps
  trustsec-sxp     Enable SNMP CISCO-TRUSTSEC-SXP-MIB traps
  tty              Enable TCP connection traps
  vdsl2line        Enable VDSL2 Line-MIB traps
  vlancreate       Enable SNMP VLAN created traps
  vlandelete       Enable SNMP VLAN deleted traps
  vpdn             Enable SNMP vpdn traps
  vrfmib           Allow SNMP vrfmib traps
  vrrp             Enable SNMP vrrp traps
  vtp              Enable SNMP VTP traps
  <cr>



RESXXXXXX#show version
Cisco IOS XE Software, Version 16.06.03
Cisco IOS Software [Everest], ISR Software (ARMV8EB_LINUX_IOSD-UNIVERSALK9_IAS-M), Version 16.6.3, RELEASE SOFTWARE (fc8)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Wed 28-Feb-18 19:53 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.  For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON

RESXXXXXXuptime is 1 hour, 13 minutes
Uptime for this control processor is 1 hour, 16 minutes
         
RESXXXXXX#show environment

Number of Critical alarms:  0
Number of Major alarms:     0
Number of Minor alarms:     0

Slot    Sensor       Current State       Reading    Threshold(Minor,Major,Critical,Shutdown)
----    ------       -------------       -------    ---------------------------------------
 R0    Temp: Int1       Normal           38    Celsius  (na ,na ,83 ,na )(Celsius)
 R0    Temp: Int2       Normal           30    Celsius  (na ,na ,81 ,na )(Celsius)
 R0    Temp: Int3       Normal           33    Celsius  (na ,na ,81 ,na )(Celsius)
 R0    Temp: Int4       Normal           35    Celsius  (na ,na ,75 ,na )(Celsius)
 R0    Temp: CPU        Normal           35    Celsius  (na ,na ,102,na )(Celsius)
 R0    Temp: Wifi       Normal           38    Celsius  (na ,na ,88 ,na )(Celsius)

1 Reply 1

balaji.bandi
Hall of Fame
Hall of Fame

he availability of notification-type options depends on the router type and the Cisco IOS software features supported on the router. For example, the envmon notification type is available only if the environmental monitor is part of the system. To see what notification types are available on your system, use the command help ? at the end of the snmp-server host command.

 

envmon --Sends Cisco enterprise-specific environmental monitor notifications when an environmental threshold is exceeded.

 

good guide to refer :

 

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/snmp/command/snmp-xe-3se-3850-cr-book/snmp-xe-3se-3850-cr-book_chapter_0101.html

 

BB

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help