Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
2255
Views
0
Helpful
25
Replies

RESTConf Install error

swDev
Level 1
Level 1

‎06-02-2022 01:50 PM

Hi, I'm trying to use RESTConf to test IOS upgrades, but I'm getting a malformed message error. 

I'm on Cisco IOS XE Software, Version 17.02.01r trying to upgrade to 17.03.04a

 

I'm doing a post to 

https://{{ _.router }}/restconf/operations/Cisco-IOS-XE-install-rpc:install

with this in the body: 

 

{
    "Cisco-IOS-XE-install-rpc:input": {
        "uuid": "test",
        "one-shot": true,
	"path": "bootflash:isr4400-universalk9.17.03.04a.SPA.bin",
         reloadfast": true
    }
}

but I receive a 400 Bad request error: 

 

{
	"errors": {
		"error": [
			{
				"error-message": "application error",
				"error-path": "/Cisco-IOS-XE-install-rpc:install",
				"error-tag": "malformed-message",
				"error-type": "application"
			}
		]
	}
}

Does anyone know what the issue is? Other RestConf operations like reload work fine

 

Labels:
0 Helpful
25 Replies 25

Georg Pauwen
VIP
VIP

‎06-03-2022 01:14 AM - edited ‎06-03-2022 01:41 AM

Hello,

 

tough one. Are you able to execute any other (simple) RESTCONF operation (such as retrieving interface information) ? The reason I am asking is that the error might apply to the specific action you want to execute (IOS upgrade)...

 

Also, the problem might be with the YANG module installed on your client. I checked Github and I think you need this one:

 

https://github.com/YangModels/yang/blob/main/vendor/cisco/xe/1731/Cisco-IOS-XE-install-rpc.yang

0 Helpful

swDev
Level 1
Level 1
In response to Georg Pauwen

‎06-03-2022 04:24 AM

Hi, 

Thank you for your response. Yes, I have been able to execute ios-xe-rpc:copy and ios-xe-rpc:reload. When I do a GET on /restconf/operations I get: 

 

<operations
	xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf">
	<ios-xe-cell-rpc:cellular
		xmlns:ios-xe-cell-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-cellular-rpc">/restconf/operations/Cisco-IOS-XE-cellular-rpc:cellular
	</ios-xe-cell-rpc:cellular>
	<ios-xe-cts-rpc:cts
		xmlns:ios-xe-cts-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-cts-rpc">/restconf/operations/Cisco-IOS-XE-cts-rpc:cts
	</ios-xe-cts-rpc:cts>
	<install-ios-xe-rpc:install
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:install
	</install-ios-xe-rpc:install>
	<install-ios-xe-rpc:activate
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:activate
	</install-ios-xe-rpc:activate>
	<install-ios-xe-rpc:install-commit
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:install-commit
	</install-ios-xe-rpc:install-commit>
	<install-ios-xe-rpc:remove
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:remove
	</install-ios-xe-rpc:remove>
	<install-ios-xe-rpc:deactivate
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:deactivate
	</install-ios-xe-rpc:deactivate>
	<install-ios-xe-rpc:abort
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:abort
	</install-ios-xe-rpc:abort>
	<install-ios-xe-rpc:auto-abort-timer
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:auto-abort-timer
	</install-ios-xe-rpc:auto-abort-timer>
	<install-ios-xe-rpc:rollback
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:rollback
	</install-ios-xe-rpc:rollback>
	<ios-xe-rpc:default
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:default
	</ios-xe-rpc:default>
	<ios-xe-rpc:clear
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:clear
	</ios-xe-rpc:clear>
	<ios-xe-rpc:crypto
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:crypto
	</ios-xe-rpc:crypto>
	<ios-xe-rpc:release
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:release
	</ios-xe-rpc:release>
	<ios-xe-rpc:reload
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:reload
	</ios-xe-rpc:reload>
	<ios-xe-rpc:factory-reset
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:factory-reset
	</ios-xe-rpc:factory-reset>
	<ios-xe-rpc:license
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:license
	</ios-xe-rpc:license>
	<ios-xe-rpc:service
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:service
	</ios-xe-rpc:service>
	<ios-xe-rpc:virtual-service
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:virtual-service
	</ios-xe-rpc:virtual-service>
	<ios-xe-rpc:copy
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:copy
	</ios-xe-rpc:copy>
	<ios-xe-rpc:delete
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:delete
	</ios-xe-rpc:delete>
	<ios-xe-rpc:app-hosting
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:app-hosting
	</ios-xe-rpc:app-hosting>
	<ios-xe-rpc:guestshell
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:guestshell
	</ios-xe-rpc:guestshell>
	<ios-xe-rpc:start
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:start
	</ios-xe-rpc:start>
	<ios-xe-rpc:stop
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:stop
	</ios-xe-rpc:stop>
	<ios-xe-rpc:hw-module
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:hw-module
	</ios-xe-rpc:hw-module>
	<ios-xe-rpc:debug
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:debug
	</ios-xe-rpc:debug>
	<ios-xe-rpc:monitor
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:monitor
	</ios-xe-rpc:monitor>
	<ios-xe-rpc:pnpa
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:pnpa
	</ios-xe-rpc:pnpa>
	<ios-xe-rpc:test
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:test
	</ios-xe-rpc:test>
	<ios-xe-ucse-rpc:ucse
		xmlns:ios-xe-ucse-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-ucse-rpc">/restconf/operations/Cisco-IOS-XE-ucse-rpc:ucse
	</ios-xe-ucse-rpc:ucse>
	<ios-xe-utd-rpc:utd
		xmlns:ios-xe-utd-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-utd-rpc">/restconf/operations/Cisco-IOS-XE-utd-rpc:utd
	</ios-xe-utd-rpc:utd>
	<bd:clear-bridge-domain
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:clear-bridge-domain
	</bd:clear-bridge-domain>
	<bd:clear-mac-address
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:clear-mac-address
	</bd:clear-mac-address>
	<bd:create-parameterized-bridge-domains
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:create-parameterized-bridge-domains
	</bd:create-parameterized-bridge-domains>
	<cisco-ia:sync-from
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:sync-from
	</cisco-ia:sync-from>
	<cisco-ia:save-config
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:save-config
	</cisco-ia:save-config>
	<cisco-ia:is-syncing
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:is-syncing
	</cisco-ia:is-syncing>
	<cisco-ia:checkpoint
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:checkpoint
	</cisco-ia:checkpoint>
	<cisco-ia:revert
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:revert
	</cisco-ia:revert>
	<cisco-ia:rollback
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:rollback
	</cisco-ia:rollback>
	<cisco-smart-license:register-id-token
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:register-id-token
	</cisco-smart-license:register-id-token>
	<cisco-smart-license:de-register
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:de-register
	</cisco-smart-license:de-register>
	<cisco-smart-license:renew-id
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:renew-id
	</cisco-smart-license:renew-id>
	<cisco-smart-license:renew-auth
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:renew-auth
	</cisco-smart-license:renew-auth>
	<notif-bis:establish-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:establish-subscription
	</notif-bis:establish-subscription>
	<notif-bis:create-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:create-subscription
	</notif-bis:create-subscription>
	<notif-bis:delete-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:delete-subscription
	</notif-bis:delete-subscription>
	<notif-bis:kill-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:kill-subscription
	</notif-bis:kill-subscription>
	<rt:fib-route
		xmlns:rt="urn:ietf:params:xml:ns:yang:ietf-routing">/restconf/operations/ietf-routing:fib-route
	</rt:fib-route>
</operations>

So the install module is there. Is there something specific I need to do to install the yang module? 

0 Helpful

Georg Pauwen
VIP
VIP
In response to swDev

‎06-03-2022 02:03 PM - edited ‎06-03-2022 02:04 PM

Hello,

 

I looked at the body code again. Try and remove the ',':

 

{
"Cisco-IOS-XE-install-rpc:input": {
"uuid": "test",
"one-shot": true,
"path": "bootflash:isr4400-universalk9.17.03.04a.SPA.bin", <-- remove the ',' (comma) at the end of this line
reloadfast": true
}
}

0 Helpful

swDev
Level 1
Level 1
In response to Georg Pauwen

‎06-03-2022 02:53 PM

The comma is needed to separate the "reloadfast" property. I deleted a double quote in front of reloadfast when I was formatting the code. The orginal json body should have looked like this: 

 

{
    "Cisco-IOS-XE-install-rpc:input": {
        "uuid": "test",
        "one-shot": true,
	"path": "bootflash:isr4400-universalk9.17.02.01r.SPA.bin",
        "reloadfast": true
    }
}

I have tried without "one-shot" and without "one-shot" and "reloadfast". Everything I've tried just gives me a malformed message error

0 Helpful

Georg Pauwen
VIP
VIP
In response to swDev

‎06-03-2022 11:06 PM

Hello,

 

sorry for the misunderstanding, what I meant was to run the code below, but I guess you have already tried that. I'll check further...

 

{
"Cisco-IOS-XE-install-rpc:input": {
"uuid": "test",
"one-shot": true,
"path": "bootflash:isr4400-universalk9.17.02.01r.SPA.bin"
}
}

0 Helpful

Georg Pauwen
VIP
VIP
In response to Georg Pauwen

‎06-03-2022 11:25 PM

Hello,

 

can you run the GET below ? That should render a list of available operations. I wonder if the 'install' is available at all in the 17.2 Amsterdam release...

 

GET https://<IP:Port>/restconf/operations/

0 Helpful

swDev
Level 1
Level 1
In response to Georg Pauwen

‎06-04-2022 06:49 AM

Yeah, it's there. I posted the GET operations response a few post above. 

 

<operations
	xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf">
	<ios-xe-cell-rpc:cellular
		xmlns:ios-xe-cell-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-cellular-rpc">/restconf/operations/Cisco-IOS-XE-cellular-rpc:cellular
	</ios-xe-cell-rpc:cellular>
	<ios-xe-cts-rpc:cts
		xmlns:ios-xe-cts-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-cts-rpc">/restconf/operations/Cisco-IOS-XE-cts-rpc:cts
	</ios-xe-cts-rpc:cts>
	<install-ios-xe-rpc:install
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:install
	</install-ios-xe-rpc:install>
	<install-ios-xe-rpc:activate
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:activate
	</install-ios-xe-rpc:activate>
	<install-ios-xe-rpc:install-commit
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:install-commit
	</install-ios-xe-rpc:install-commit>
	<install-ios-xe-rpc:remove
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:remove
	</install-ios-xe-rpc:remove>
	<install-ios-xe-rpc:deactivate
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:deactivate
	</install-ios-xe-rpc:deactivate>
	<install-ios-xe-rpc:abort
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:abort
	</install-ios-xe-rpc:abort>
	<install-ios-xe-rpc:auto-abort-timer
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:auto-abort-timer
	</install-ios-xe-rpc:auto-abort-timer>
	<install-ios-xe-rpc:rollback
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:rollback
	</install-ios-xe-rpc:rollback>
	<ios-xe-rpc:default
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:default
	</ios-xe-rpc:default>
	<ios-xe-rpc:clear
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:clear
	</ios-xe-rpc:clear>
	<ios-xe-rpc:crypto
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:crypto
	</ios-xe-rpc:crypto>
	<ios-xe-rpc:release
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:release
	</ios-xe-rpc:release>
	<ios-xe-rpc:reload
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:reload
	</ios-xe-rpc:reload>
	<ios-xe-rpc:factory-reset
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:factory-reset
	</ios-xe-rpc:factory-reset>
	<ios-xe-rpc:license
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:license
	</ios-xe-rpc:license>
	<ios-xe-rpc:service
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:service
	</ios-xe-rpc:service>
	<ios-xe-rpc:virtual-service
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:virtual-service
	</ios-xe-rpc:virtual-service>
	<ios-xe-rpc:copy
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:copy
	</ios-xe-rpc:copy>
	<ios-xe-rpc:delete
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:delete
	</ios-xe-rpc:delete>
	<ios-xe-rpc:app-hosting
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:app-hosting
	</ios-xe-rpc:app-hosting>
	<ios-xe-rpc:guestshell
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:guestshell
	</ios-xe-rpc:guestshell>
	<ios-xe-rpc:start
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:start
	</ios-xe-rpc:start>
	<ios-xe-rpc:stop
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:stop
	</ios-xe-rpc:stop>
	<ios-xe-rpc:hw-module
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:hw-module
	</ios-xe-rpc:hw-module>
	<ios-xe-rpc:debug
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:debug
	</ios-xe-rpc:debug>
	<ios-xe-rpc:monitor
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:monitor
	</ios-xe-rpc:monitor>
	<ios-xe-rpc:pnpa
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:pnpa
	</ios-xe-rpc:pnpa>
	<ios-xe-rpc:test
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:test
	</ios-xe-rpc:test>
	<ios-xe-ucse-rpc:ucse
		xmlns:ios-xe-ucse-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-ucse-rpc">/restconf/operations/Cisco-IOS-XE-ucse-rpc:ucse
	</ios-xe-ucse-rpc:ucse>
	<ios-xe-utd-rpc:utd
		xmlns:ios-xe-utd-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-utd-rpc">/restconf/operations/Cisco-IOS-XE-utd-rpc:utd
	</ios-xe-utd-rpc:utd>
	<bd:clear-bridge-domain
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:clear-bridge-domain
	</bd:clear-bridge-domain>
	<bd:clear-mac-address
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:clear-mac-address
	</bd:clear-mac-address>
	<bd:create-parameterized-bridge-domains
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:create-parameterized-bridge-domains
	</bd:create-parameterized-bridge-domains>
	<cisco-ia:sync-from
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:sync-from
	</cisco-ia:sync-from>
	<cisco-ia:save-config
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:save-config
	</cisco-ia:save-config>
	<cisco-ia:is-syncing
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:is-syncing
	</cisco-ia:is-syncing>
	<cisco-ia:checkpoint
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:checkpoint
	</cisco-ia:checkpoint>
	<cisco-ia:revert
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:revert
	</cisco-ia:revert>
	<cisco-ia:rollback
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:rollback
	</cisco-ia:rollback>
	<cisco-smart-license:register-id-token
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:register-id-token
	</cisco-smart-license:register-id-token>
	<cisco-smart-license:de-register
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:de-register
	</cisco-smart-license:de-register>
	<cisco-smart-license:renew-id
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:renew-id
	</cisco-smart-license:renew-id>
	<cisco-smart-license:renew-auth
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:renew-auth
	</cisco-smart-license:renew-auth>
	<notif-bis:establish-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:establish-subscription
	</notif-bis:establish-subscription>
	<notif-bis:create-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:create-subscription
	</notif-bis:create-subscription>
	<notif-bis:delete-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:delete-subscription
	</notif-bis:delete-subscription>
	<notif-bis:kill-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:kill-subscription
	</notif-bis:kill-subscription>
	<rt:fib-route
		xmlns:rt="urn:ietf:params:xml:ns:yang:ietf-routing">/restconf/operations/ietf-routing:fib-route
	</rt:fib-route>
</operations>
0 Helpful

Georg Pauwen
VIP
VIP
In response to swDev

‎06-04-2022 07:00 AM

Hello,

 

I should have seen that in your initial post...my bad.

 

I am still looking at the syntax, but it looks perfectly ok. What client do you use to send the request ? Have you turned on debugging (debug restconf) ? That could render a clue...

0 Helpful

swDev
Level 1
Level 1
In response to Georg Pauwen

‎06-04-2022 07:06 AM

Currently I am using Insomnia to test before trying to implement into our C# project. I have not turned on debugging, it's just adding "debug restconf" to the Cisco config?

0 Helpful

Georg Pauwen
VIP
VIP
In response to swDev

‎06-04-2022 07:20 AM

Hello,

 

just type debug restconf at the exec prompt. Curious to know the results...

0 Helpful

swDev
Level 1
Level 1
In response to Georg Pauwen

‎06-04-2022 07:46 AM

I am not getting any output. Will this work over SSH or do I need to be consoled in? 

0 Helpful

Georg Pauwen
VIP
VIP
In response to swDev

‎06-04-2022 09:04 AM

Hello,

 

SSH should work, as long as you have access to the command prompt:

 

Nexus#debug restconf

 

Just make sure you have logging enabled. Can you post the output of 'show log' ?

0 Helpful

swDev
Level 1
Level 1
In response to Georg Pauwen

‎06-04-2022 09:20 AM

Ok, I can see the logging by running "show log profile restconf". Thank you

 

ROuter000001#show log profile restconf
Displaying logs from the last 0 days, 0 hours, 10 minutes, 0 seconds
executing cmd on chassis local ...

2022/06/04 16:03:30.814378 {dmiauthd_R0-0}{1}: [errmsg] [13816]: (note): %DMI-5-AUTH_PASSED: User 'root' authenticated successfully fromIP_ADDRESS:0 and was authorized for rest over http. External groups: PRIV15
2022/06/04 16:03:30.821218 {nginx_R0-0}{1}: [ngx_core] [15990]: (note): [15995] [access_log]IP_ADDRESS - root [04/Jun/2022:16:03:30 +0000] "GET /restconf/operations HTTP/1.1" 200 8420 "-" "insomnia/2022.3.0"
2022/06/04 16:04:22.113604 {dmiauthd_R0-0}{1}: [errmsg] [13816]: (note): %DMI-5-AUTH_PASSED: User 'root' authenticated successfully fromIP_ADDRESS:0 and was authorized for rest over http. External groups: PRIV15
2022/06/04 16:04:22.169999 {nginx_R0-0}{1}: [ngx_core] [15990]: (note): [15995] [access_log]IP_ADDRESS - root [04/Jun/2022:16:04:22 +0000] "POST /restconf/operations/Cisco-IOS-XE-install-rpc:install HTTP/1.1" 400 253 "-" "insomnia/2022.3.0"
2022/06/04 16:06:54.695660 {dmiauthd_R0-0}{1}: [errmsg] [13816]: (note): %DMI-5-AUTH_PASSED: User 'root' authenticated successfully fromIP_ADDRESS:0 and was authorized for rest over http. External groups: PRIV15
2022/06/04 16:06:54.718553 {nginx_R0-0}{1}: [ngx_core] [15990]: (note): [15995] [access_log]IP_ADDRESS - root [04/Jun/2022:16:06:54 +0000] "POST /restconf/operations/Cisco-IOS-XE-install-rpc:install HTTP/1.1" 400 253 "-" "insomnia/2022.3.0"
0 Helpful

Georg Pauwen
VIP
VIP
In response to swDev

‎06-04-2022 10:11 AM

Hello,

 

I am not really sure why it authenticates 'root', since you specified 'test' as the uuid. Is there a user root and/or test configured on the Nexus with privilege level 15 ?

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents