09-17-2024 08:59 PM
Hi, if I have remove a client using Cisco Prime Infrastructure how do I re-enable or allow it back in to the network.
09-17-2024 10:18 PM
- I presume that since Prime is only for Network Management, this will have no effective impact on the client as far as Network Access is concerned ,
M.
09-18-2024 12:50 AM
If the client is reconnected on the network he will be able to continue work. I don't see an option to how you could disable client access using prime? Did you delete an mac address/or shut down a port?
BR
09-18-2024 01:26 AM
I have removed the client using the "remove" option. after removal the client/laptop can see the network SSID but cannot connect. can you help where to check? Network has two WAP controllers C1,C2. Before client can connect between the two. Client was removed using "CPrime". Client connecting only to one controller C2. Client was removed again, now Client cannot connect to Wifi Network.
09-18-2024 02:06 AM
- Check if you can change the status of the client in Prime by going to Monitor > Monitoring Tools > Clients and Users.
==> Try to find the client
(Since that is reported by the WLC I would consider that the particular client still manageable by Prime.)
M.
09-20-2024 05:19 PM
Thanks Marce. I have done this I can see the client mac address and client WAP connection history but since the client was removed and unable to connect to the network. I only get " Client is no longer connected to the network" and cannot find an option to restore. I tried to browse the manual CPRIME has a section REMOVE a client but cannot find the RESTORE section.
Is "REMOVE" mean removing only on CPRIME? and not boot me out of the network, meaning I could still login/join and automatically be restored back again? but not the case...I am denied connecting to WAP..
09-22-2024 11:43 PM
Hi this Issue is resolved. Solution was found. Praise! GOD who opens the eye of the blind and grants wisdom.
Many thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide