Hello Everyone,
I'm not so familiar with OID things,but i did a new Radius configuration to achieve a Radius failover on our switch using command:
radius-server deadtime 1
I tried to find the OID that represent the deadtimer to monitor the failover process ,and by using the cisco MIB Locator:
https://mibs.cloudapps.cisco.com/ITDIT/MIBS/servlet/index
i found the following MIB : CISCO-STACK-MIB which has this OID:
Name: radiusDeadtime
OID: .1.3.6.1.4.1.9.5.1.22.3.0
but when I do SNMP get command using MIB Client Browser from the switch to check this OID (radiusDeadtime) ,I got the following message:
Name/OID: radiusDeadtime.0; Value (NoSuchObject): (Snmp No Such Object)
Switch Model : WS-C2960S-24PS-L
IOS: c2960s-universalk9-mz.152-2.E9.bin
and I'm using snmp polling.
would you please help me.
Many thanks
Ibrahim
