SNMP-Polling for Missing BGP Advertised & Accepted Prefixes mibs

[mohit-ganjoo]

I am using 8000 series one with IOS-XR 7.11.2 and other with 7.7.2.

When I did a snmpwalk, neither had the complete set of bgp4 mibs. Is that possible ? or am I missing something ? 

I am trying to poll bgp advertised and accepted prefixes. 

cbgpPeerAcceptedPrefixes  1.3.6.1.4.1.9.9.187.1.2.4.1.1 ---- missing
cbgpPeerAdvertisedPrefixes   1.3.6.1.4.1.9.9.187.1.2.4.1.6 --- missing

Is there any other way to poll these 2x metrics ?? 

I have attached bgp mibs available post snmpwalk.

[Dan Frey]

Is the peer using bgp address families? 

[mohit-ganjoo]

Yes 

[Georg Pauwen]

Hello,

what if you poll these values individually, e.g.:

snmpwalk -v2c -c cisco 172.168.160.237 CISCO-BGP4-MIB::cbgpPeerAdvertisedPrefixes

snmpwalk -v2c -c cisco 172.168.160.237 CISCO-BGP4-MIB::cbgpPeerAcceptedPrefixes

Or configure SNMPv3 and poll that...

snmpwalk -v3-

?

[mohit-ganjoo]

I will try that , but in theory should that resolve to the same OID ?

[Georg Pauwen]

Hello,

indeed it should resolve to the same OID, I just wonder if maybe the snmpwalk causes these values to be ommitted...

You could also (obviously) try SNMPv1...