SNMP return traffic = broadcast?

[r-tyrell]

I am trying to snmp poll one of my switches and have been unsuccessful. After performing some debugs I found that the switch is replying via snmp to the 255.255.255.255 broadcast address and not the ip address that sent the request. I have attached the debugs of a working/ not-working snmp query and the configs of a working (rtc-2nd-east01) and non-working (rtc-agg01) switch. Any help would be appreciated, Thank you!

[r-tyrell]

I could only add three attachments, here is the config of the non-working switch

I also forgot to mention that the ip address that is performing the snmpwalk is 10.20.20.10.

[r-tyrell]

After working with TAC we discovered this was a software bug.

CSCsk80935

Externally found severe defect: Resolved (R) SXF12, SNMP response being broadcast

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk80935

This bug is fixed in these versions:

12.2(32.8.11)SX125

12.2(18.11.5)SXF

12.2(18)SXF12

12.2(33)SXH1