Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Calling all Cisco experts …. I’m looking for any advice and recommendations for a couple of my customers who are looking for High Availability for their Internet Edge. They don’t have their own CIDR block but do have multiple ISPs. I was thinking t...
I have a large network comprised of 2950s at the access Layer, 3548XLs at the Distribution and 6500s at the Core. The 6500s are the VTP Servers and the rest of the switches are VTP clients. We are running pim sparse-mode at the Core. The problem I fo...
I am trying to snmp poll one of my switches and have been unsuccessful. After performing some debugs I found that the switch is replying via snmp to the 255.255.255.255 broadcast address and not the ip address that sent the request. I have attached...
I would like to prioritize traffic from our network to 63.241.29.0/25I have tried using the priority bandwidth (1544 in this example) and the priority % under theQoS policy-map class configuration with what seems like no effect on traffic to this net...
Can subinterfaces be created and assigned to VLANs on the WAN ports of an 1811 router? I know they can be created on an 1841. Thank you for your response.
I found that all of my syslog messages were being captured under /var/log/messages. This was due to my Cisco devices being configured with "logging facility local5". Instead of reconfiguring all of my devices to log to facility local7, I just chang...
After working with TAC and per your message, it does look like the problem has to do with having to re-associate. I was confused as to the direct cause of the problem due to a number of WEB-Auth Policy timeout messages received during debugs etc.Tha...
I actually don't have the DHCP required option checked on the WLAN. I am using the internal DHCP Server on the Controller. This is a WiSM and not a 5508 Controller.I have decided to open another TAC Case on the issue. There should be a way to adju...
Hello, and thanks for tip on how to tweak the Web-Auth Policy timeout. Can you tell me what version of code you were running when enabling IPv6 on the WLAN? I'm currently running 7.0.116.0 and when I attempt to enable IPv6 I receive the error mess...
Where you able to get the ACS Server back online with a reboot? I'm running 5.2 and tried to change the password the same way and locked myself out.Thanks,-Rick
