cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8296
Views
0
Helpful
1
Replies
uthayaman
Beginner

SNMP v3 TRAP

Hi,

We are trying to configure SNMP V3 trap on our routers and switches. I can able send V3 trap to our NMS, but it is mentioned that we need contextengine and contextname to process the trap.

We have configured a simple TRAP configuration without aut and priv.

How can i find the context information.Is this is configurable.How ?

Here is my trap configuration

snmp-server user TRAP TRAP v3

snmp-server group TRAP v3 noauth notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F

snmp-server host 10.4.x.x version 3 noauth TRAP

Thx

-uthay

1 ACCEPTED SOLUTION

Accepted Solutions
Joe Clarke
Hall of Fame Cisco Employee

You don't need context information for sending traps.  Your NMS will need to know the SNMP engineID of the agent, however.  You can find that with the "show snmp engine" command.  You will then need to configure your NMS with the agent's engineID and authentication/privacy parameters.

View solution in original post

1 REPLY 1
Joe Clarke
Hall of Fame Cisco Employee

You don't need context information for sending traps.  Your NMS will need to know the SNMP engineID of the agent, however.  You can find that with the "show snmp engine" command.  You will then need to configure your NMS with the agent's engineID and authentication/privacy parameters.

View solution in original post

Content for Community-Ad