01-20-2020 10:53 AM
Hi All,
I have a router (ASR) with multiple VRFs and SNMPv3 configured.
I would like to send snmp traps to 2 different servers. One of them is reachable through the global routing table and one of them is reachable through a VRF. For this purpose I planned to use Loopback interfaces as source (one in global, one in VRF).
Can I use 2 different snmp trap sources at the same time?
01-20-2020 09:50 PM
- Check the link below for useful hints , if any :
M.
09-15-2021 02:09 AM
Hi,
The solution behind your link sets the source interface (a single one) into a VRF.
But questions is:
Is there a possibility to sent traps to two different trap receivers (in different VRFs)? So in my opinion we need two different trap-source-interfaces (each in the correspondig VRF). Do someone know a solution for that?
br
AM
04-23-2021 02:20 AM
Hello there, did below suggestion solve your isse? I have the same ask. Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide