Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, I have a router (ASR) with multiple VRFs and SNMPv3 configured.I would like to send snmp traps to 2 different servers. One of them is reachable through the global routing table and one of them is reachable through a VRF. For this purpose I p...
Hi All, I'm planning to use a ASR 1009-X router with 40Gbit connections (80Gbit throughput) and I would like to know whether any performance licenses are needed?Also do you know any documentation regarding the Cisco licensing? What kind of possible l...
Hi All, I do not have experience to Cisco Aironet devices or Wireless networks in general, but I have a AIR-SAP1602E-E-K9 access point and I would like to enable MIMO functionality to increase performance.At the moment I have the following configura...
Hi All,
do you know how will SNMP act when it has an ACL configured but the ACL is not existing anymore:
snmp-server community Test RW 66
R1#show ip acce 66
R1#
Is it "permit any" or "deny any"?
Hi All,
I would like to know what is the difference between the 2 route leaking method:
global-address-family ipv4 unicast
route-replicate from vrf RED unicast all
---------------
!Gi0/0 is in VRF RED
ip route 10.0.0.1 255.255.255.0 Gi0/0
Does...
Hey, WPA2/AES is used for security and WMM is enabled.Do I need to do anything to enable MIMO? Or is it on by default? Can I verify it somehow? On the other hand, based on the Modulation and coding schemes table, I can reach max 144Mbps to a client, ...
I've also found this documentation useful: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/csa/configuration/xe-16-6/csa-xe-16-6-book/csa-concepts.html
Thanks for the hint!
Unfortunately, it's still not clear how does the Right to Use licence type work.
As I understand Evaluation Right to Use means that you can use a specific function for a given time period. After that time counts down the Eval...
