SNMPv3 traps in multiple VRFs

[Human374]

Hi All, 

I have a router (ASR) with multiple VRFs and SNMPv3 configured.

I would like to send snmp traps to 2 different servers. One of them is reachable through the global routing table and one of them is reachable through a VRF. For this purpose I planned to use Loopback interfaces as source (one in global, one in VRF).

Can I use 2 different snmp trap sources at the same time?

[Mark Elsen]

 - Check the link  below for useful hints , if any :

   https://community.extremenetworks.com/data-center-slx-vdx-mlx-ces-232983/how-to-configure-snmp-host-when-the-snmp-server-is-in-one-vrf-7822640

 M.

[andy_munk]

Hi,

The solution behind your link sets the source interface (a single one) into a VRF.
But questions is:

Is there a possibility to sent traps to two different trap receivers (in different VRFs)? So in my opinion we need two different trap-source-interfaces (each in the correspondig VRF). Do someone know a solution for that?

br

AM

[JorgeGarciaRodriguez12890]

Hello there, did below suggestion solve your isse? I have the same ask. Thanks.