summary active open call legs on MGCP gateway in snmp

[kurtdeneef]

Hello,

I'm busy searching for the correct OID (and MIB table) to get the summary of all active open call legs on the MGCP gatway.

When you issue the "sh voice call status" command,you get this output:

MONVGWBEL03# sh voice call status

CallID CID ccVdb Port DSP/Ch Called # Codec Dial-peers

0x2EF8C 315F 0x82C2F1B4 0/0:15.26 0/1 *8713870861 g711alaw 2001/1

0x2EF9A 345F 0x82C2F1B4 0/0:15.28 0/1 *7068221138 g711alaw 8001/1

0x2EFA4 355F 0x82C2F1B4 0/0:15.27 0/1 *3145558248 g711alaw 2001/1

0x2EFB7 24A6 0x82C2F1B4 0/0:15.0 0/1 25469718 None 1/2001

4 active calls found

Anyone an idea how i can define the snmp-get for this?

Thanks for some feedback.

Kurt

[thomas.chen]

There are numerous MIBs that contain voice call statistics. These include:

DIAL-CONTROL-MIB

CISCO-DIAL-CONTROL-MIB

CISCO-VOICE-COMMON-DIAL-CONTROL-MIB

you can search in these mibs for more info.

[jvanick]

did anybody ever figure out the answer to this?

Thanks!