cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
664
Views
0
Helpful
2
Replies

System Config Polling Job(CWLMS 3.2)

Bethuelle
Level 1
Level 1

Hye To All,

Application     : Archive Mgmt

RME Server      : dla-prod-cwlms

Device          : BSAM-EGLISE-AGG-SW01

Category        : CONFIG_CHANGE

Connection Mode : SSH

Time            : Tue Jun 14 23:04:11 GMT+01:00 2011

User            : cwlms

Description     : System Config Polling Job : VLAN-RUNNING

The above is contained in a mail sent to me by CWLMS 3.2 but I do not quite understand what the statement I have underlined means.

Can anyone help me out? thanks in advance.

1 Accepted Solution

Accepted Solutions

Nael Mohammad
Level 5
Level 5

RME can't determine if changes occurred in the vlan.dat so it archives regardless. If you want to not get notification on the vlan.dat, you will need to filter it. Enable the filter for vlan configuration from RME --> Admin --> Change Audit --> Config Change Filter.

View solution in original post

2 Replies 2

Nael Mohammad
Level 5
Level 5

RME can't determine if changes occurred in the vlan.dat so it archives regardless. If you want to not get notification on the vlan.dat, you will need to filter it. Enable the filter for vlan configuration from RME --> Admin --> Change Audit --> Config Change Filter.

Hye Nael,

So if I get you right, it just simply means that the change occured either in the VLAN.dat or the RUNNING CONFIG?