Telnet

[Eng.AD27]

Hi dears

i cant access telnet  in  cisco  N540X-16Z4G8Q2C or access through it 

RP/0/RP0/CPU0:ios1#telnet ?
                                  ^
% Invalid input detected at '^' marker.
RP/0/RP0/CPU0:ios#telnet

can  you  help me .. thanks

[Mark Elsen]

 Ref : https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/en/us/td/docs/iosxr/ncs5xx/system-setup/71x/b-system-setup-cg-71x-ncs540/b-system-setup-cg-71x-ncs540_chapter_0111.html.xml

 >...

  The router can be accessed using remote management protocols, such as SSH, Telnet, SCP and FTP. SSH is included in the software image by default, but telnet is not part of the software image. You must manually install the telnet optional package to use it

 M.

[Eng.AD27]

dear Marce

if you  can  support us telnet package with  these procedures if you  know , thankfully

[balaji.bandi]

get telnet package and install :

https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5xx/system-setup/70x/b-system-setup-cg-70x-ncs540/b-system-setup-cg-70x-ncs540_chapter_01001.html