Hi All,
We would like to modify the configuration via SNMPset command but unfortunately now the SNMPv3 was configured to Read only.
Any experts here could advise?
snmpset -v3 -l authPriv -u <SNMPv3 USER> -a MD5 -A <PASSWORD> <SWITCH_IP> .1.3.6.1.4.1.9.9.96.1.1.1.1.14.222 integer 6
In the past, we could modify the config via SNMPv2.
SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.2.222 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.3.222 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.4.222 = INTEGER: 4
SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.5.222 = IpAddress: 172.16.1.1
SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.6.222 = STRING: "switch.config"
SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.14.222 = INTEGER: 1