to be unable to discover a Nexus 5548 wirth DCNM 5.2(2e)

[delahais]

Hello,

I am unable to discover 2 Nexus 5548 with the SAN client of DCNM 5.2(2e)

These Nexus are used like LAN and SAN switch. Each Nexus is a SAN fabric. I would want to use DCNM in order to configurate the zone/zoneset via GUI. These Nexus 5548 run 5.1(3)N2(1b) release.

The Nexus ARE NOT managed  via the Mgmt interface (OOB) but they are managed via an interface vlan (InB)

I could not configure rightly

- the snmp-server user (SNMP user V1/v2 or V3 + group ? )  CLI on Nx

- to configure the discovery in order that DCNM discover each fabric either from web GU interface or java SAN client

Please help !

[Marvin Rhoads]

I believe DCNM requires an ssh login to the Nexus and not SNMP.

DCNM uses Netconf over SSH protocol. See this earlier posting.