cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1444
Views
0
Helpful
3
Replies

Unable to upload via rsync or scp w/ ASA 5506-X

Richard Langly
Level 1
Level 1

I have an ASA 5506-X and connect to the VPN of another company. When doing so, I am unable to upload files using rsync or scp. I can download using rsync or scp just fine over the VPN. If I remove the 5506 from my network and replace it w/ a much cheaper firewall, I can upload using rsync and scp just fine.

 

Any thoughts?

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

You need to look at what ACL Policy you have. - Open ASDM does the real-time monitor capture.  and test it.

 

if possible post the config for us to understand, tell us your Local IP and far-end IP address 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

My local IP for wan interface is via DHCP. I use openvpn to connect to my company using their config initiated from my desktop. I've attached a "show running" of my config.

 

I'm really at a loss as to why I can't upload files in an OpenVPN tunnel between my desktop and my work place. It's not like the ASA can see the encrypted traffic.

 

Any help much appreciated.

Shameless bump if anyone has ideas why this is occurring.