02-05-2009 03:02 AM
Hi,
has anyone tested user tracking option "configure trunk for end host discovery"? If enabled, i only get the user information for the native vlan. We have some nexans fiberswitches connected to cisco 4507 & 6500 via trunk ports. We need the information about the connected users. LMS is 3.1, installed on windows 2003.
André
Solved! Go to Solution.
02-05-2009 07:25 AM
This feature tells UT to acquire users found in the MAC address table on trunk ports. That will include all VLANs. However, Campus may not be showing the other VLANs as user VLANs for this switch. In that case, you will need to modify NMSROOT/campus/etc/cwsi/ut.properties, and set UTGetVlansWithUserPorts=0.
02-05-2009 07:25 AM
This feature tells UT to acquire users found in the MAC address table on trunk ports. That will include all VLANs. However, Campus may not be showing the other VLANs as user VLANs for this switch. In that case, you will need to modify NMSROOT/campus/etc/cwsi/ut.properties, and set UTGetVlansWithUserPorts=0.
02-06-2009 12:20 AM
thank you for the information. now it works.
andré
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide