Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,we have configured tacacs accounting on a n7k but Show commands are not logged to an ISE. For n5k accounting log for show commands is not supported " The accounting log feature does not log the show commands. For example, the feature does not log ...
Hi,we have configured cisco ISE for authentication and authorization. The setup works fine but sometimes we have the problem that users are not authorized.In 8 of 10 login attempts the authentication is fine for the nexus 7702 but no authorization re...
Hi,is it possible to get the PI VUDI via the cli? Under administration->licenses we get the error "Wrong PID in Licence file".I tried to re-create the license via the license team but they need to know the vudi, the problem is that we cannot open adm...
Hi,DFM3.1 on LMS 3.1 reports power supply NOTPRESENT in detailed device view for cisco 3945.This will also reported under alert and activities.Under environment both power supplies are managed and the status is OK but under InterfaceStatus:CARD it sh...
The problem was solved by removing the single-connection in the tacacs-server host config.Unclear why the same config and OS works with 7706 but not with 7702.
Hi,
which debug commands would you suggest for the nexus? On the ISE we did some TCP dumps were we can see that there are rarely authorization requests from the nexus 7702.
André
Hi,your licensing team is asking me for a VUDI for PI 2.2 And actually "the problem is that we cannot open administration->settings->appliance".I will open a case for this. André
Hi Vinod,thank you for your response. I know that LMS 3.1 is end of all. Device is reachable via snmp without any problem.DFM can connect to the device with DFM. So it seems that this is a DFM issue? Do you mean that this problem is fixed in LMS 4.2....
