VMS Firewall MC (Supported Commands)

[srowles]

Hi I am using the Firewall MC to manage our FWSM and there seems to be a few commands that are not supported. I am particularly surprised to see that the "access-group out" command is not supported as we wish to use this alot to control access to out Server VLANs.

OSPF is also not suppported. We are also using this.

I am using Firewall MC 1.3.4 which I think is the latest.

Does anyone know if there is a patch or an up and coming release that will support these commands.

Thanks in advance.

[mchin345]

Make sure you are on the latest version of Firewall MC to have the most up to date support of various PIX commands. then, verify that the command set is supported in Firewall MC as noted here (latest version).

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/mgt_pix/fwmc133/dvice133.htm

[srowles]

Hi and thanks for the reply.

We are running the latest version of software and the commands I mentioned are not supported. Hopefully Cisco will support them in a later release of the MC.

Regards

Steve