Network Management

Evertime I o into DFM in Cisco Works 2000 I get an error message that asks to run "bin\DFMVlaidateUpgrade.bat"After I run the batch file I choose option one and point to the CD ROM drive that has the DFM CD. That does not work. Where is th correct fi...

We're running cwlms v1.2 and started seeing the following error message:{diskWatcher}: Almost out of disk space on C:\.I checked the C: drive and it has plenty of space available.Has anybody gotten this error and can shed the light on it?thanks.

Hai,I am using LMS 2.5 on windows 2000 adv server.with all latest service packs.Currently i discovered 6509 switches - 23500 XL switches - 32522 routers -1These are all shown in Layer 2 map.But now when i added 2 4506 switch and another 1 2522 switch...

I'm having problems retrieving the running config from some of my devices. The snmp ro and rw strings. telnet and enable passwords pass device credentials test. Methods of retrievel are set to Telnet then tftp. The only difference I can see between t...

On Configuration Management, Archive Status -- I am showing "Failed" on a handful of devices in the Failed Running Configuration Devices Summary with the following error:Telnet: Failed to get the begin in Configuration file TFTP: PGM_NM=Configuration...

HI,My router C3660 rebooting itself a lot of times and it's give me the following error, so please could any one help about the cause of this errorI think it's Flash problem or damged image is that right.$$ show vermonitor: command "show" not found$$...

Hi I am using the Firewall MC to manage our FWSM and there seems to be a few commands that are not supported. I am particularly surprised to see that the "access-group out" command is not supported as we wish to use this alot to control access to out...

Hello,I'm trying to install LMS 2.5 and IPTEM 2.0 on the same server. However I can't install IPTEM 2.0 when I had LMS 2.5 installed and IPTEM 2.0 asks me to uninstall whole Cisco Works Application.I could install IPTEM 2.0 first then install LMS 2.5...

With regard to Local Director, does Local Director monitor the state of the connections it has passed to the reals?For instance if we never want to exceed 200 current connected users to a webserver, will setting this parameter to 200 accomplish that?

Hi,Have anyone came across with the following error and solution?"500 Internal Server Errorjsp:javax.servlet.ServletException: Not enough space.I tried increasing the memory size, removing the /servlets/jsp files, and stop and start dmgtd. These ste...

I'm hoping someone out there will have the pinouts to connect the console port on a Catalyst 3750 to a Blackbox Rack Terminal Server 16 port.The Blackbox is using RS232 V.24 on UTP8 with RJ45 connectors:1 - DCD2 - RTS3 - DSR4 - TxD5 - RxD6 - GnD7 - C...

I have un router 3640 and I need get environmental information ( temperature, fans ) about it. I believe that there is environmental MIBs for it .....Any known anything about it MIBs ???Best Regards....

Basically a customer of mine has an upgrade license to upgrade Ciscoworks common services 2.2 to LMS 2.5. However, having bought new hardware he has done brand new installation of LMS 2.5 instead of doing the upgrade.Will this cause problems later?

I cannot push out any netconfig changes? Does netconfig use ssh? I do not have ssh configured on my devices. The output reads as: -ERROR:RME_CDL1031:Transport session to device failed Failed to establish SSH connection to "ip address" - Cause: Device...