09-08-2011 02:21 AM
Dear all,
I have installed Cisco Works LMS 3.2 to adminsitrate and monitor 100 routers connected via Frame Relay Link and IP MPLS connection. I have added all the routers and associate them to the campus manager module. On the toplology services, I have all routers as not connected and reacheble devices. I would like to show the WAN links on the topology, how can I do for that?
Thanks In advance
Houichi Nizar
Solved! Go to Solution.
09-08-2011 09:19 AM
Campus Manager will only display WAN links if you have a layer 2 connection between your devices over which CDP broadcasts will work. This can be difficult with 3rd party providers in the loop.
One possible work around is to use a GRE tunnel and activate CDP on the Tunnel interfaces. Of course, that's still not a complete picture of your environment.
Hope this helps.
09-08-2011 09:19 AM
Campus Manager will only display WAN links if you have a layer 2 connection between your devices over which CDP broadcasts will work. This can be difficult with 3rd party providers in the loop.
One possible work around is to use a GRE tunnel and activate CDP on the Tunnel interfaces. Of course, that's still not a complete picture of your environment.
Hope this helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide