I have Cisco CISCO2911/K9 router (15.7(3)M) and I would like to graph (using SNMP) some counters which are shown using "show crypto session", however, I have not been able to find which MIB resp.
When I make snmpwalk
server:~$ snmpwalk -c <community> -v 2c <router> .188.8.131.52.184.108.40.206.220.127.116.11.1.35 iso.18.104.22.168.22.214.171.124.126.96.36.199.35.3490 = INTEGER: 1 iso.188.8.131.52.184.108.40.206.220.127.116.11.35.3491 = INTEGER: 1 iso.18.104.22.168.22.214.171.124.126.96.36.199.35.3492 = INTEGER: 1 iso.188.8.131.52.184.108.40.206.220.127.116.11.35.3493 = INTEGER: 1 server:~$
However digital value after .3.1.35. obtained randomly. I need to get the sum of all the rows (4).
server:~$ snmpwalk -c <community> -v 2c <router> .18.104.22.168.22.214.171.124.126.96.36.199 iso.188.8.131.52.184.108.40.206.1.3.2 = No Such Object available on this agent at this OID server:~$
What am I doing wrong?
- Check if the MIB is supported on your device :