ws-c3650 switch output drops inquiry

[KDG_work]

Hi all.

I am using two WS-C3650-48PD-S switches, and Gi1/0/47 and Gi1/0/48 ports for each switch are connected by setting them as port channels. ( Boot System : cat3650_caa-universalk9.16.06.04a.SPA.bin )

When checking with the show interface command, the number of output drops is increasing.

Is there a cause and solution?

[MHM Cisco World · Accepted solution]

qos queue-softmax-multiplier 400

Run above command and check drop 

MHM

[KDG_work]

Thank you for your reply.
I have additional inquiries.
Are there any documents, such as notices, from Cisco regarding the symptoms?

[MHM Cisco World]

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-3850-series-switches/200594-Catalyst-3850-Troubleshooting-Output-dr.html

Check this 

MHM