06-19-2012 08:02 PM - edited 03-11-2019 04:21 PM
I am planning on rolling out 8.4 to all my customers who are currently running 8.2.5. Can anyone provide feedback on 8.4 as to which release is the most stable?
Right now I am leaning towards 8.4.2.
Also if anyone can share with me bad bug experience with 8.3 , like the nat exempt unidirectional bug, that would be helpful.
Thanks much
Sent from Cisco Technical Support iPad App
Solved! Go to Solution.
06-19-2012 09:43 PM
Josh,
I have been upgraded some customers from 8.2(1) to 8.4(3), the only think I can point is:
* When you have a rules where you allow a traffic from specific network/ip, the version 8.4 doesn't translate it well.
* Review all rules one by one.
I did a a 5 customers and the must common problem was missing some rules
That's it.
regards.
06-19-2012 11:13 PM
I'm running 8.4.3, 8.4.4 and 8.4.4.1 without bigger problems. Plan some time to clean up the NAT-config after the upgrade. The internal upgrade-script of the ASA produces quite a mess if your NAT-config is more complex then just internet-access.
regards, Karsten
Sent from Cisco Technical Support iPad App
06-19-2012 09:43 PM
Josh,
I have been upgraded some customers from 8.2(1) to 8.4(3), the only think I can point is:
* When you have a rules where you allow a traffic from specific network/ip, the version 8.4 doesn't translate it well.
* Review all rules one by one.
I did a a 5 customers and the must common problem was missing some rules
That's it.
regards.
06-19-2012 11:13 PM
I'm running 8.4.3, 8.4.4 and 8.4.4.1 without bigger problems. Plan some time to clean up the NAT-config after the upgrade. The internal upgrade-script of the ASA produces quite a mess if your NAT-config is more complex then just internet-access.
regards, Karsten
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide