Access Firepower 1010 Management via VPN Tunnel

[rob1456657]

I have a Firepower 1010 configured for a small branch with a site-to-site VPN tunnel to the home office. The tunnel works, and we can access resources on either side of the tunnel. However, I need help with two things: allowing pings to the firewall and accessing the management web interface. I currently have a PC I can remote into and access management that way.

I'm trying to figure out what I am doing wrong; this was much easier with the ASA!

Does anyone have any suggestions?

Thanks in advance for any advice or assistance.

[MHM Cisco World]

Access cli of ftd from office using s2s vpn?

How you manage this ftd' fdm or fmc?

MHM

[rob1456657]

Not from "home" but from Home Office = Work Office!

That's what I am trying to figure out: is it possible to access the web interface via the s2s Tunnel?

[MHM Cisco World]

What you meaning web interface?

[rob1456657]

Yes, that is correct.

Is it possible to access the web interface via the s2s Tunnel?