11-28-2008 04:51 AM - edited 03-11-2019 07:19 AM
Hello,
I have configured IPSec VPN and it works. But The client has access to inside servers but not to Internet http through the ASA.
I have opened split-tunnel at the moment, but it is a temporarily solution.
How can I configure to have access to Internet http from VPN clients through the ASA?
11-28-2008 05:42 AM
Configure your vpn as full tunnel, no split
and add this to your config to allow vpn pool network get outbound internet access.
same-security-traffic permit intra-interface
global (outside ) 1 interface
nat (outside) 1
08-24-2011 12:29 PM
Thanks. This worked for me. I was missing the NAT statement for the outside interface.
11-28-2008 05:58 AM
Hi,
Please refer the below URL for configuration details.
PIX/ASA and VPN Client for Public Internet VPN on a Stick Configuration Example
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805734ae.shtml
Regards,
Arul
*Pls rate if it helps*
11-28-2008 07:18 AM
Elena, the link provided by Arul is great to get full understanding and terms.. the statements I have provided originally also depicts the same principle on the link.
Bst Rgds
Jorge
11-28-2008 07:53 AM
I will try it. Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide