10-31-2012 10:24 AM - edited 03-12-2019 06:04 PM
Hi everyone,
We have 2 ASA in cluster.
I saw one has Solid Orange light for active status and other has Active ligh off.
Is this some issue?
Thanks
MAhesh
Solved! Go to Solution.
10-31-2012 10:35 AM
Hello Mahesh18,
Not at all, that is how Failover works!
The active led is no longer showing the activity of thedevice but it's current failover state, meaning the standby's LED will be amber. So it isn't showing any problems.
Regards,
Julio
10-31-2012 01:14 PM
Hello Mahesh,
and ASA which has Orange light in Front panel of Active LED is in standby state? Yes, that is true.
So does this mean that ASA which is currently active in state will have no green LED in Front panel of Active status: Actually should be green, I just read your post againg and you said it is not green
Can you share the show failover from both units?
11-01-2012 10:37 AM
Hello,
Exactly those are the one . Glad to see we are good on this one
Regards,
Remember to rate all of the helpful posts
10-31-2012 10:35 AM
Hello Mahesh18,
Not at all, that is how Failover works!
The active led is no longer showing the activity of thedevice but it's current failover state, meaning the standby's LED will be amber. So it isn't showing any problems.
Regards,
Julio
10-31-2012 12:30 PM
Hi Julio,
So does this mean that ASA which is currently active in state will have no green LED in Front panel of Active status
and ASA which has Orange light in Front panel of Active LED is in standby state?
Thanks
Mahesh
10-31-2012 01:14 PM
Hello Mahesh,
and ASA which has Orange light in Front panel of Active LED is in standby state? Yes, that is true.
So does this mean that ASA which is currently active in state will have no green LED in Front panel of Active status: Actually should be green, I just read your post againg and you said it is not green
Can you share the show failover from both units?
10-31-2012 01:52 PM
Hi Julio,
the active ASAs green light is off.
currently i can not share the config.
ASA looks good.
Thanks for help again Julio
10-31-2012 02:00 PM
Hello Mahesh,
Great I could help
Regards,
11-01-2012 09:59 AM
Hi julio,
Checked lights on ASA when i cluster mode
Back side of ASA which is active has solid green light.
Back side of ASA which is standby has amber light.
Active ASA front side Active status is off.
Seems we should conside lights in the back side while checking active /standby ASA
Thanks
Mahesh
11-01-2012 10:37 AM
Hello,
Exactly those are the one . Glad to see we are good on this one
Regards,
Remember to rate all of the helpful posts
11-01-2012 10:46 AM
Thanks Julio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide