cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
20289
Views
0
Helpful
8
Replies

Active status light on ASA is Solid Orange

mahesh18
Frequent Contributor
Frequent Contributor

                   Hi everyone,

We have 2 ASA in cluster.

I saw one has Solid Orange light  for active status and other has Active ligh off.

Is this some issue?

Thanks

MAhesh

3 Accepted Solutions

Accepted Solutions

Julio Carvajal
Advisor
Advisor

Hello Mahesh18,

Not at all, that is how Failover works!

The active led is no longer showing the activity of thedevice but it's current failover state,  meaning the standby's LED will be amber. So it isn't showing any problems.

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

View solution in original post

Hello Mahesh,

and ASA  which has Orange light in Front panel  of Active  LED  is in standby state? Yes, that is true.

So does this mean that ASA  which is currently active in state will  have  no green LED  in Front panel of Active status: Actually should be green, I just read your post againg and you said it is not green

Can you share the show failover from both units?

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

View solution in original post

Hello,

Exactly those are the one . Glad to see we are good on this one

Regards,

Remember to rate all of the helpful posts

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

View solution in original post