After port security config cameras not working

[warner1]

hello all

after port security configuration my cameras are not working which are connected to the switch but all the other devices are working good like Biometric which are in the same switch.

help me out in this regard.

[balaji.bandi]

DUPLICATE

[MHM Cisco World]

show port-security address

check if the mac address of camera appear in this table.

[Marius Gunnerud]

How many devices are connected to a single port? Are the cameras connected to the switch where port security is configured? If yes, then shut the port down and bring it back up to clear the mac associated with the port.