08-23-2010 02:44 PM - edited 03-10-2019 05:06 AM
Hello,
I would like to know if its possible to have an AIP-SSM module on a ASA configured in trasparent mode and if its possible to have it in multiple contexts. Two different scenarios. The client wants to know that and I would like to see it on a Cisco document if possible. I think both scenarios are possible but I haven't found any document.
Thanks,
Paul
Solved! Go to Solution.
08-23-2010 03:15 PM
Hi Paul,
Here is the link which explains how you can configure multiple virtual sensors and as you can see it is supported on both routed and transaprent mode.
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/ips.html#wp1087111
Hope this helps.
Thanks,
--Sunil
08-23-2010 03:15 PM
Hi Paul,
Here is the link which explains how you can configure multiple virtual sensors and as you can see it is supported on both routed and transaprent mode.
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/ips.html#wp1087111
Hope this helps.
Thanks,
--Sunil
08-23-2010 03:24 PM
It helped. Thanks a lot my friend.
08-23-2010 03:25 PM
Yes, you can have an AIP-SSM module on an ASA configured in transparent mode or in multiple contexts. I could not find a document that mentions trasnparent mode but you'll see reference to multiple context in the documents below:
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/ssm.html#wp1097278
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/ssm.html#wp1091984
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide