06-15-2012 06:21 PM - edited 03-11-2019 04:20 PM
Hi experts,
I am installing an ASA 5520 and I have a problem on accepring the incoming traffic from an external office connected via Frame Relay.
On my OUTSIDE interface I have both the internet traffic and the external office traffic incoming. What comes from the external office is visible as 10.1.0.0/16.
I have to allow this traffic to enter the internal network, without any control. I would also keep the original IP address.
I have configured the Firewall but I don't know how to setup the NAT. Can you please help me doing it?
Thanks,
Dario
06-15-2012 06:22 PM
06-15-2012 08:16 PM
I've fixed. IT is necessary to add an EXEMPT in the NAT rules.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide