10-18-2019 06:00 AM
Hi all,
i had a problem that was discussed a lot i think.
I have to migrate our active/standby firewall configuration in one single firewall and dual ISP configuration.
My question is about the Anyconnect SSLVPN.
Can someone give me an example about the right configuration to deploy on the ASA if i loose the connectivity on the first ISP ?
?
I have to deploy the webvpn on both line ?
Best Regards
Massimo Riboli
best Regards
Solved! Go to Solution.
10-19-2019 02:05 PM
Hi,
You need to enable webvpn on both interfaces and then setup SLA tracking so that default route switches if the next hop out outside1 interface fails. You will also need to create an AnyConnect profile that specifies the primary connection in the Server List and the backup connection in the Backup Servers section
10-19-2019 02:05 PM
Hi,
You need to enable webvpn on both interfaces and then setup SLA tracking so that default route switches if the next hop out outside1 interface fails. You will also need to create an AnyConnect profile that specifies the primary connection in the Server List and the backup connection in the Backup Servers section
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide