Hello Cisco Support,
I'm setting up inter routing between VLANs and have a weird issue. I have a network that looks something like this:
ISP --> ASA --> NetGear Switch (with 802.1) --> HP Proliant Servers
ASA is broadcasting VLANs 1,2,3,4,20
I added these lines to the running config:
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
VLANs 1,4,20 all have security level 100 but I can only access a few IPs between the VLANs. Can someone help?
-Rashian