11-27-2023 01:11 AM
Hello
We have issues in the failover once in a while as shown :
please can you help us why that hapend and how can solve it ?
thanks
11-27-2023 01:15 AM
Show failover
And
Show failover history
Share this but please as text or with good quality image
Thanks
MHM
11-27-2023 01:36 AM
NCB-MDC-INTERNET-EDGE# show failover state
State Last Failure Reason Date/Time
This host - Primary
Active None
Other host - Secondary
Standby Ready None
====Configuration State===
Sync Done
====Communication State===
Mac set
==============
NCB-MDC-INTERNET-EDGE# show failover history
==========================================================================
From State To State Reason
==========================================================================
10:06:19 EET Nov 26 2023
Not Detected Negotiation No Error
10:06:39 EET Nov 26 2023
Negotiation Just Active No Active unit found
10:06:39 EET Nov 26 2023
Just Active Active Drain No Active unit found
10:06:39 EET Nov 26 2023
Active Drain Active Applying Config No Active unit found
10:06:39 EET Nov 26 2023
Active Applying Config Active Config Applied No Active unit found
10:06:39 EET Nov 26 2023
Active Config Applied Active No Active unit found
==========================================================================
11-27-2023 01:40 AM
Split Brian issue I think
Can I see
Show failover
I need to see the monitoring status of interface.
11-27-2023 05:44 AM
I have seem similar issues with ASA5585 with SFP module. The issue in the cases I have seen is due to the SFP module reporting issues causing the ASA to failover. Not saying this is your issue, but it might be worth looking into to be sure the integrated module in ASA5516 is not the cause of the issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide