I have an ASA 5520 on FW 9.0(4).
I have on it 3 subnets :
- inside (10.1.1.0/24)
- outside (188.8.131.52/28, webserver Public ip 184.108.40.206)
- DMZ (220.127.116.11, webserver DMZ ip 18.104.22.168)
Clients on the inside are able to access internet without any issue
Webserver located on the DMZ is accessed without any issue if request come from the outside using its public ip.
But we can't access Webserver from the inside using its public IP. (I don't want to do nat 0)
On FW previous 8.4 this command would have solved my problem :
static (DMZ,inside) 22.214.171.124 126.96.36.199
I did not found how to reproduce the same behaviour on post 8.4 FW
Many thanks by advance for any help.