ASA 5520 ASDM Failed to Launch

[Jackong]

I have new ASA 5520 from the box and i have configured already int g0/1 with ip 10.15.14.5 255.255.255.0 nameif inside kindly see details below the config

CiscoAsa# sh run http

http server enable

http 0.0.0.0 0.0.0.0 management

http 192.168.1.0 255.255.255.0 management

http 192.168.1.2 255.255.255.255 management

CiscoAsa# sh run asdm

asdm image disk0:/asdm-621.bin

no asdm history enable

management-access management

still i cant browse the ASDM page https://192.168.1.1/admin but i am able to ping the IP Address of my ASA5520

having same issue i did all which was posted here....

[Jackong]

correction to my previous post i configured the management port 192.168.1.1 255.255.255.0 nameif management

[Paul Preston]

Hi Jason,

Probably you will need to setup the authentication:

aaa authentication http console LOCAL

Please check if output of show asdm image referrs to the correct image.

If that doesn't help, enable logging throught console and try connecting again.

Kind Regards,

--
Paul Preston
Proxar IT Ltd. Registered in England and Wales: 6744401- VAT: 942985479
Tubs Hill House, London Road, Sevenoaks, Kent, TN13 1BL
Tel:  (+44) 0844 809 4335
Fax: (+44) 01732 468 574
Mob: (+44) 077 9509 3450
Web: www.proxar.co.uk
Email: paul.preston@proxar.co.uk

[Jackong]

thank you for your response Mr. Paul but i have tried enabling the aaa authentication http console local and also created username and password but still not showing anything from my browser....https://92.168.1.1/admin

[Jackong]

Mr. Paul i have read some articles and im not sure of this......

Problem: Using a 64-bit Java Version on Windows causes ASDM Launcher to Fail and the Launcher does not Run

When you use a 64-bit Java version on Windows, it causes the ASDM Launcher to fail and the launcher does not run.

Solution

This issue is documented in Cisco bug ID CSCtb86774 (registered customers only) .

The workaround is to run the ASDM using the web browser.