01-27-2014 09:12 AM - edited 03-11-2019 08:36 PM
Hi,
Currently I will have an ASA-5525-X in multiple context mode, since this will be at Remote Datacenter, I'm planing to access the solution
through an IPSEC tunnel.....Remote-Access tunnel, not an L2L tunnel, I know this was not supported until version 9.x, digging in to the release notes apparently this only supported in L2L mode
Straight from the release notes for 9.1
Multiple Context Mode Features | |
Site-to-Site VPN in multiple context mode | Site-to-site VPN tunnels are now supported in multiple context mode. |
So can anyone confirm that this is not supported in Remote-Access mode
Best regards,
Bruno Fernandes
Solved! Go to Solution.
01-27-2014 09:23 AM
Hi,
The latest configuration guide (9.1) on the Cisco site lists the following Guidelines and Limitations
Unsupported Features
Multiple context mode does not support the following features:
•RIP
•OSPFv3. (OSPFv2 is supported.)
•Multicast routing
•Threat Detection
•Unified Communications
•QoS
•Remote access VPN. (Site-to-site VPN is supported.)
Source:
http://www.cisco.com/en/US/docs/security/asa/asa91/configuration/general/ha_contexts.html#wp1382237
http://www.cisco.com/en/US/products/ps6120/products_installation_and_configuration_guides_list.html
- Jouni
01-27-2014 09:23 AM
Hi,
The latest configuration guide (9.1) on the Cisco site lists the following Guidelines and Limitations
Unsupported Features
Multiple context mode does not support the following features:
•RIP
•OSPFv3. (OSPFv2 is supported.)
•Multicast routing
•Threat Detection
•Unified Communications
•QoS
•Remote access VPN. (Site-to-site VPN is supported.)
Source:
http://www.cisco.com/en/US/docs/security/asa/asa91/configuration/general/ha_contexts.html#wp1382237
http://www.cisco.com/en/US/products/ps6120/products_installation_and_configuration_guides_list.html
- Jouni
01-27-2014 09:26 AM
Hi Jouni,
Thank's
BF
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide