ASA 5525-X multiple context-mode IPSEC tunnel

[bruno.fernandes]

Hi,

Currently I will have an ASA-5525-X in multiple context mode, since this will be at Remote Datacenter, I'm planing to access the solution

through an IPSEC tunnel.....Remote-Access tunnel, not an L2L tunnel, I know this was not supported until version 9.x, digging in to the release notes apparently this only supported in L2L mode

Straight from the release notes for 9.1

Multiple Context Mode Features
Site-to-Site VPN in multiple context mode	Site-to-site VPN tunnels are now supported in multiple context mode.

So can anyone confirm that this is not supported in Remote-Access mode

Best regards,

Bruno Fernandes

[Jouni Forss · Accepted solution]

Hi,

The latest configuration guide (9.1) on the Cisco site lists the following Guidelines and Limitations

 Unsupported Features 
 Multiple context mode does not support the following features: 
 •RIP 
 •OSPFv3. (OSPFv2 is supported.) 
 •Multicast routing 
 •Threat Detection 
 •Unified Communications 
 •QoS 
 •Remote access VPN. (Site-to-site VPN is supported.) 

Source:

http://www.cisco.com/en/US/docs/security/asa/asa91/configuration/general/ha_contexts.html#wp1382237

http://www.cisco.com/en/US/products/ps6120/products_installation_and_configuration_guides_list.html

- Jouni

[bruno.fernandes]

Hi Jouni,

Thank's

BF