Hello Expert,
I am confused in configuring my setup with ASA 5585 ( version 9.4 (2) 11) in Routed Mode.
Please see attached network diagram with details :
1. Cisco 3560 L3 Switch with 3 different subnet ip on 3 different ports:
216.218.185.65 /27
64.62.153.225/27
75.52.80.129/27
2. First Cisco 2960 L2 switch0 with one VLAN (Vlan 1) and all three Cisco 2960 ports (connected to 3560) added in Vlan1.
3. Second Cisco 2960 L2 switch1 = Need to be Configured
4. ASA 5585 Firewall = Need to be configured
5. Nexus N5000 Switch where three windows servers connected whose ip addresses is : = Need to be configured if required
Server1= 216.218.185.77/27 Gateway = 216.218.185.65
Server2 = 64.62.153.239/27 Gateway = 64.62.153.225
Server3 = 75.52.80.146/27 Gateway = 75.52.80.129
My task is, above three windows server ip address's should be ping from Cisco 3560 L3 Switch ?
Overall ping should be bidirectional that's it.
Please send me configuration of this setup asap. Very Urgent
KS
