05-19-2011 08:31 AM - edited 03-11-2019 01:35 PM
We are looking to move a Data Center. Not a pretty project, for sure... The current Data Center Hosts make any form of monitoring of Bandwidth usage unreliable. What is the best suggestion on Logging or monitoring the Traffic to/from our ASA device? The ASDM interface does not show me much in the way of Traffic/Bandwidth history.
Suggestion?
05-19-2011 10:17 AM
Hi Greg,
Could you be a bit more specific, what data do you want to monitor, just the traffic hitting the firewall? or a particular interface?? or resources being utilized on the firewall??
Thanks,
Varun
05-19-2011 11:30 AM
What I would like to see is bandwidth utilization at p
oints in time... Or every Hour or every 5 minutes. Something like that... Traffic/bandwidth on the external interface... How much traffic is going through the external pipe...
05-19-2011 11:39 AM
Hi Greg,
You can check those details in the output for :"show traffic", this should provide you most of the details that you might need. Let me know if you were looking out for these details only.
Thanks,
Varun
05-19-2011 11:51 AM
SHow Traffic? From CLI? I only have ASDM access to this device, unfortunately... Or is that in the
ASDM and I am missing it?
05-19-2011 11:58 AM
Hi Greg,
Well that was a CLI comman, if you are using ASDM onlt , go to Tools------> command line interface and type in the command.
I am not sure but on ASDM as well you have a useful option under Firewall Dashboard, you do get this info there as well. I am not in office right now, so don't have access to my lab. But definitely you can give it a try there as well.
Hope this helps.
Thanks,
Varun
05-19-2011 12:01 PM
02-19-2020 12:45 AM
hello good people...kindly assist me here....I want to check bandwidth usage on my ASA with the times
thanks
Regards
SikhumbuzoMahlambi3049
It's not bad
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide