We have an ASA 5555-X running 9.2(1). It is connected to an VSS-1440 running IOS 15.1(2)SY4.
They form an OSPF area, the ASA should distributes its connected and static subnets to the router via OSPF. It works fine for the subnets which are directly connected to the ASA, but not for a subnet for which the ASA has a static route.
This is the ASA OSPF config:
router ospf 1 network 126.96.36.199 255.255.255.0 area 29 network 10.10.0.0 255.255.248.0 area 29 [more subnets] area 29 stub no-summary log-adj-changes redistribute static subnets
OSPF neighbours seem correct.
Subnets which are directly connected to the ASA are fine:
asa# sh route 188.8.131.52
Routing entry for 184.108.40.206 255.255.255.0 Known via "connected", distance 0, metric 0 (connected, via interface) Routing Descriptor Blocks: * directly connected, via vlan100 Route metric is 0, traffic share count is 1
router#sh ip route 220.127.116.11 Routing entry for 18.104.22.168/24 Known via "ospf 1", distance 110, metric 20, type intra area Last update from 10.141.90.26 on Vlan100, 01:54:45 ago Routing Descriptor Blocks: * XXXXXXXXXX, from XXXXXXXXXX, 01:54:45 ago, via Vlan449 Route metric is 20, traffic share count is 1
Subnets which are static to the ASA don't work:
asa# sh route 10.10.0.0
Routing entry for 10.10.0.0 255.255.248.0 Known via "static", distance 1, metric 0 Redistributing via ospf 1 Advertised by ospf 1 subnets Routing Descriptor Blocks: * 10.9.8.204, via vlan100 Route metric is 0, traffic share count is 1
router#sh ip route 10.10.0.0 % Subnet not in table