06-24-2024 10:11 AM
Hi I enabled radius authentication via the asdm to our nps server. The username and password works however when prompting for the password again for enable mode, it gives me an error. I then have to use the old local enable password to get into the mode. Is there an easy way to fix this in the asdm so that the same password allows you to get into enable mode too?
Thanks
06-24-2024 10:14 AM
Can I see the confi of aaa server in asa
MHM
06-25-2024 12:13 AM
Make sure the user in Priv 15 mode - check below guide :
06-25-2024 07:42 AM
aaa-server NPS_Servers (inside) host 10.171.xx.27
key *****
aaa-server NPS_Servers (inside) host 10.171.xx.28
key *****
user-identity default-domain LOCAL
aaa authentication ssh console NPS_Servers LOCAL
aaa authentication login-history
Balaji the NPS server works for other devices on the network including other asa firewalls.
06-25-2024 07:51 AM
Debug aaa comm 10
Check if the aaa send anything to aaa server when you try to access asa.
It can the asa dont any connection to aaa and use local and if that correct then you need to specify privilege 15.
But let check aaa first
MHM
06-25-2024 10:57 PM
Balaji the NPS server works for other devices on the network including other asa firewalls.
If this is the only firewall not working, i would compare working vs not working config.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide